ZrO2 Ceramic

​DIN6325 ceramic dowel pins are made of zirconia ceramic (ZrO2 or Zirconium Oxide), which has ultra-high hardness, excellent wear resistance and mechanical strength. They are used as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts. Compared with steel pins, zirconia ceramic dowl pins are much more wear resistant and durable, having higher mechanical strength. Besides, zirconia ceramic dowel pins have good resistance to acids & alkalis, they can be used for applications where have strong corrosion. Any inquiry please email info@mascera-tec.com or call +86 13860446139

Mascera offers custom production for zirconia ceramic rings, they are made of extreme hard zirconia ceramic (ZrO2, Zirconium Oxide), the hardness is up to Moh's grade 8.5 which is very close to that of dimond (Moh's grade 10), therefore zirconia ceramic rings can be machined with diamond machining tools only. The ceramic rings are made of superfine raw powders and fully dense, a mirror surface could be achieved after fine grinding and polishing. Any inquiry please email info@mascera-tec.com or call +86 13860446139

Zirconia plungers are made of exteme hard zirconia ceramic (zirconia ceramic), have the characteristics of high strength, wear resistance, corrosion resistance, and good toughness, making them more durable than metal coated plungers, the service life of zirconia plungers is 10 times longer than that of the metal plunger. At the same time, because of the excellent resistance to saltwater, oil, and some chemical solutions, zirconia plunges are widely applied in medical, food and beverage, petrochemical, and specialty chemical industries where fluid contamination is not permitted Any inquiry please email info@mascera-tec.com or call +86 13860446139

MASCERA Atomizing Nozzles are produced with the highest cast tolerances and are used in the molten metal atomizing process, as well as other casting departments for flow control. We offer precise and repeatable dimensional control, which ensures that each part will perform exceptionally to provide precise particle sizing and flow. Mascera is a reputable supplier for high quality zirconia ceramic nozzles, Welcome to contact us when you have demand, we will do our best to match your demands. Any inquiry please email info@mascera-tec.com or call +86 13860446139

Mascera offers custom production for zirconia ceramic sleeves / tubes, they are made of extreme hard zirconia ceramic (ZrO2, Zirconium Oxide), the hardness is up to Moh's grade 8.5 which is very close to that of dimond (Moh's grade 10), therefore zirconia ceramic sleeves / tubes can be machined with diamond machining tools only. The ceramic sleeves / tubes are made of superfine raw powders and fully dense, a mirror surface could be achieved after fine grinding and polishing. Any inquiry please email info@mascera-tec.com or call +86 13860446139

Zirconia ceramic has higher fracture toughness than alumina ceramic, it also has high hardness, good wear resistance and high mechanical strength, it is widely applied for structural ceramic parts or wear resistant parts make ceramic valve components, ceramic utility blades, ceramic grinding media, ceramic pump plungers, ceramic bearings and so on. Any inquiry please email info@mascera-tec.com or call +86 13860446139

Mascera offers custom production for zirconia ceramic discs, they are made of extreme hard zirconia ceramic (ZrO2, Zirconium Oxide), the hardness is up to Moh's grade 8.5 which is very close to that of dimond (Moh's grade 10), therefore zirconia ceramic discs can be machined with diamond machining tools only. The ceramic discs are made of superfine raw powders and fully dense, a mirror surface could be achieved after fine grinding and polishing. Any inquiry please email info@mascera-tec.com or call +86 13860446139

Mascera produces a variety of crucibles based on stable zirconia. The performance of the finished products depends on the manufacturing method and the choice of stabilizing medium. Calcium oxide, magnesium oxide, and yttrium oxide are used as stabilizers, each with different thermal characteristics. The team can assist customers in selecting the appropriate zirconia crucible based on specific usage scenarios or produce products according to customer drawings and requirements. Any inquiry please email info@mascera-tec.com or call +86 13860446139

Ceramic bearings have the characteristics of high temperature resistance, cold resistance, wear resistance, corrosion resistance, anti-magnetism, insulation, self-lubrication, high speed, etc. The service life of ceramic bearings is more than 3 times higher than that of steel bearings. Any inquiry please email info@mascera-tec.com or call +86 13860446139